Glove Holder Not Included With The Unit

This unit can be used for the storage of the following: gowns, face masks, surgical caps and gloves. The Multi-Purpose Holder has a divided area with window on the front for easy access to facemasks or surgical caps and a glove holder slide on the bottom.

The Multi-Purpose Holder can be mounted on windows or doors by using the Item #GH02-CLIP or on doors and walls with two screws and two 1/2" diameter washers. Designed so that the unit can easily be removed from its location, cleaned and returned.

The Multi-Purpose Holder can replace storage carts, which are located in the hallways and, because of low cost, you can locate one near each room.

The Multi-Purpose Holder is made out of high impact, chemical resistant plastic that complies with FDA standard: 21 CFR 177, 1315.

This plastic is also used in orthopedic parts and components for medical equipment.

Size: 23" wide x 18" high x 6" deep

Gown Holder - Item #GH01

This unit can be used for the storage of hospital gowns, facemasks and other equipment immediately required for the health and safety of the patient. 

This unit can be mounted on doors and walls with two screws and two 1/2" diameter washers.  Designed so that the unit can easily be removed from its location, cleaned and returned.

The Gown Holder can replace storage carts, which are located in the hallways and, because of low cost you can locate one near each room.

The Gown Holder is made out of high impact, chemical resistant plastic that complies with FDA standard: 21 CFR 177, 1315.

Replica Watches|Swiss Rolex Replica Watches|Replica watches|http://www.cameshoe.com/

 
Manufactured out of cleat acrylic plastic 1/4" thick

 
Mounting Clip - Item #GH02-CLIP

The mounting clip is used in conjunction with the Multi-Purpose Holder Item #GH02.

This clip makes it possible to mount the holder on glass with a clear double-sided tape supporting up to 65 pounds of weight.

New Products & Projects - If you have anything which requires custom design contact the Hospital
 Equipment Division of H & H Machined Products.  We will take your idea and turn it into a product.